ENVIRONMENTAL SERVICES
We drilled our first environmental project in 1989. Since then we have continually expanded our knowledge, skills and equipment.
TYPE OF SERVICES
Auger drilling from 4” to 15”
Soil sampling- split spoon, continuous dry coring
Water sampling - grab water and hydropunch
Well installation – monitoring and extraction
Well abandonment – over drilling and pressure grouting
Angle drilling
Nested, cluster and multi-point wells
Remediation- injection, extraction, sparge & vapor points
Conductor casings
Sonic - Direct push
Soil sampling, continuous and 5’ piston discrete sample—Aqua Lock System
Geoprobe Macro core soil sampler – 5’X 1.77” PVC liner
Dual Tube sampling
Monitor wells and vapor points
Remediation – injection
Rigs include Truck-mounted, limited access, all-terrain and Portable
 |
Groundwater Investigation
|
EQUIPMENT DESCRIPTION
Sonic Direct Push Track Rigs
SONIC DIRECT PUSH CS-10 - rubber track , all-terrain, compact, fast, better recovery as sonic reduces wall friction, more representative samples, no cuttings, easy sampling in flowing sands, no pounding sample ahead of shoe, heat minimized as sampler does not rotate, rods hydraulically tighten water tight thus no cross contamination when taking water samples. 5 psi ground pressure
|
5’ macro-core type soil sampler, PVC liner 1.77”x 5’
5’ Aqua lock discrete soil sampler
Dual tube soil sampling
Hydropuch water sampling
Light duty augering
Concrete coring
6.5’ Wide
14’ Long
8.5’ high mast dn. & 17’ mast up
Weight 14,4 00 lb. |
(more sonic info)
(more pictures)
Truck-Mounted Auger Rig-
CME 75 High Torque Auger Rig- New 9/ 2002 – Industry premier heavy-duty rig.
 |
Torque – 13,000 Ft.-lb
Augers up to 15”
Auto-hammer
In-hole-hammer
Mono-pump
5’ Continuous Dry Sampler System
8’ wide
26’ long
31.5’ high mast up, 11.3’ mast dn. |
(more pictures)
DEEPROCK - DR10K -Variable Overhead, High Torque Auger Rig – Can be used under power lines and canopies, inside buildings and at the edge of roads, or in full production mode- mast at 22’ high, if there are no overhead limitations
 |
Auger Rig
High Torque – 10,000 Ft.-lb.
Mast hydraulically adjusts 13’ to 22’
Wire-line sampling
Mono Pump
8’ wide
23’ Long
11’ high mast down
Weight - 22,000 lb.
|
DEEPROCK - DR5K – Medium Torque Truck Auger Rig
 |
Auger Rig
Torque – 5,000 Ft.-lb.
Long stroke – 15’
Cathead
8.25’ Wide
22’ Long
11.5’ high (mast dn.)
25’ high (mast up)
Weight – 23,000 lb. |
Limited Access Track Rigs
DEEPROCK - DR8K- rubber track auger rig- variable height mast. Excellent inside bldg. under power-lines, under canopies and inside narrow spaces. Can take 10” augers to 100’
 |
Auger Rig
Angle drilling
Torque – 7500 ft-.lb
Auto-hammer
Mono Pump
Powers Portable rig for remote use
5 ’-2” Wide
13’ Long
7 ’ 3” high (mast dn.)
Min. Ht. 8’-9” with SFA
Min. Ht. 9’-6” with HSA
Weight 10,3 00 lb. |
(more pictures)
All-Terrain Track Auger Rigs
MOROOKA TRACK - All-Terrain Drill Rig- If you can walk it we can drill it.
Very stable. Slopes up to 30 degrees. Excellent on muddy sites.
Portable drill rig can be powered up to 250’ from this rig.
 |
Augers - up to 11”
Torque – 3,000 ft-lb
Rubber tracks – 20” wide
Cathead and 140# drop hammer
7’ wide
13’ Long
7 ’ high
Weight - 12,000 lb. |
(more pictures)
Remote Access – Portable - Auger Rig
PORTABLE REMOTE ACCESS AUGER DRILL – Can be set up in remote locations – hillsides, under canopies, under bridges, in ditches, inside closets, in rooms, basements, etc.
Access to drill location can be through narrow door, through windows, over walls, down hillsides, etc.
Rig is hand carried to drill locations in components (mast, rotary head, base, cathead, controls, 140# drop hammer, samplers, rods, augers) and assembled over hole.
Two hydraulic hoses are extended from DR8K or Morooka rig to power Portable drilling rig. Maximum distance from power source – 250’
 |
Augers up to 11”
Torque – 3,000 Ft.-lb.
Cathead and 140 lb .drop-hammer
Concrete coring
Rig can be bolted to concrete floor
Rig can be staked to hillside
Minimum passage width 24”.
Minimum work area 3’ X 6’
Minimum overhead 8’ with SFA & 9.5’ with HSA |
(more pictures)
Off-Road Support Equipment
Morooka Support Vehicle – All-terrain, rubber tracks.
It can go where our support trucks cannot go.
It has a hydraulic dump bed and is capable of moving pallets of materials, augers, rods, water tank, generator and other equipment.
 |
Width – 7’
Length – 12’
Height – 6.5’
Weight – 12,000 lbs. |
OTHER EQUIPMENT
Support trucks, pumps, generators, pressure washers, decon ponds, hoses, forklift, hopper, concrete core barrels, etc.
PHOTO GALLERY
|
|
Truck Rigs
|
Sonic DP Rig
|
|
|
|
|
Sonic DP Rig
|
Sonic DP Rig
|
|
|
|
|
Sonic DP Rig
|
CME Rig
|
|
|
|
|
|
|
DR10K |
DR10K |
|
|
|
|
|
|
DR10K |
Morooka Track |
|
|
|
|
|
|
DR8K |
DR8K |
| |
|
|
|
|
|
Portable Remote Access Rig |
Portable Remote Access Rig |
|
|
|
|
|
|
Portable Remote Access Rig |
Portable Remote Access Rig |
|
|
|
|
| |
|
Portable Remote Access Rig |
Portable Remote Access Rig |
|
|
Click on the picture for more information
For more photos (click here) To go to our photo gallery
Health and Safety: All personnel have current 40-hr OSHA health and safety training and participate
in a medical surveillance program. We provide our own PPE.
